2017 Dufour 40E Performance

| 40'

Newport Beach, CA 92663

Request a Price

Engine

Total Power

Engine Hours

Class

Racer/Cruiser

Length

40ft

Year

2017

Model

40E Performance

Capacity

Boat Details

Description

A WINNER ON ALL COUNTS

The target set for architect Umberto Felci and the Dufour Yachts Design Office was to come up with something even better than the Dufour 40. What a challenge! And they more than came up with the goods!

Its many qualities speak for themselves : finesse, precision, exciting sailing.

Take a look at :

cruising/racing deck layout, suitable for sailing with a full or reduced crew, out on the open sea or between two buoys;
below decks, the refinement and quality of Dufour Yachts’ interiors.

All adding up to a fast boat for racing or just for the pleasure of skimming through the water; which at the same time lets you enjoy proper cruising in comfort.

Measurements

Dimensions

Nominal Length:40ft

Length Overall:40.5ft

Max Draft:6.92ft

Beam:12.75ft

Length at Waterline:35.33ft

Weights

Dry Weight:18,794Lb

Tanks

Fresh Water Tanks:100.39gal

Fuel Tanks:52.83gal

Accommodations

Cabins:3

Heads:2

More Details

Manufacturer Provided Description

Its many qualities speak for themselves : finesse, precision, exciting sailing.

Take a look at :

cruising/racing deck layout, suitable for sailing with a full or reduced crew, out on the open sea or between two buoys;
below decks, the refinement and quality of Dufour Yachts’ interiors.

All adding up to a fast boat for racing or just for the pleasure of skimming through the water; which at the same time lets you enjoy proper cruising in comfort.

Hull

Hull: Hand-laminated in polyester/glassfibre; sides made from
vacuum-bonded PVC foam core sandwich.
Decoration: Decorative grey stripes on hull.
Gelcoat: NPG gelcoat with first mat impregnated with NPG resin
forming an optimum barrier against osmosis.
Structure: Hull bottom counter-moulded, floors laminated into the hull.
Deck: Sandwich with injected PVC foam core
Ballast: Keel bolts bear on stainless back-plates
Rudder:Semi-elliptical shape, filled with closed-cell epoxy foam.
Rudder stock:Solid stainless steel.
Steering: Self-aligning roller bearings with ball-bearing sheaves
Non-slip deck surface: Non-slip structured deck surface.

Deck

Shroud chain-plates: Single stainless chainplate for cap shrouds/aft
lower shrouds, including an eye for fixing extra control lines.
Safety chainplates: Safety harness chainplates in cockpit floor
Chainplates: Asymmetrical spinnaker tack ring forward of forestay
Midships mooring cleats: 2
Mooring cleats: 4
Rubbing strips: 6 stainless, on hull sheerline
Fuel deck fillers: 1
Water deck fillers: 2
Mainsheet tracks: On cockpit floor with car adjustment lines.
Genoa tracks: With plunger cars.
Pulleys:2 genoa sheet return pulleys with built-in jamcleat and
attachment plate for spinnaker fly pulley.
Through-deck fitting: Stainless, for electrical cables, swan-neck.
Deck organizers: 2 deck organizers for halyard returns.
Halyard winches: 2 halyard winches on cabin roof.
Sheet winches: 2 Genoa sheet winches
Jamcleats: 2 rows ofjamcleats port/ starboard level with the companionway
Furler line jamcleats: 1 at aft end of sidedeck
Hatch covers: Polyester hatch cover forward of the companionway

Cockpit

Cockpit bench seats: Slatted teak
Lockers: 2 large side lockers, lids with fixing for padlock.
Helm: 2 steering wheels
Helm console: 2, aluminium
Engine control: Engine control panel and lever to starboard
Compasses: 2 on coaming aft .
Gas locker: On port side.
BIB locker: “Life raft stowage in dedicated locker in cockpit, aft.”
Shower: Cold water.
Shore supply: Socket to stbd in cockpit
Cockpit floor: Cockpit floor in polyester, slightly concave, with solid
wood toe-boards
Emergency tiller: Head of rudder stock beneath helmsman’s floor for
fitting the emergency tiller

Galley

Configurations: L-shaped on port side of companionway
Worktop: In GCorian®C synthetic resin with wooden fiddle.
Sink: Stainless, twin bowls with Corian®C synthetic resin covers,
one of which can be used as a chopping board
Water: Hot and cold pumped water with chrome-plated brass
single-lever mixer tap.
Gas cooker: 2-burner cooker with oven on gimbals, with stainless rail
Crockery storage: Dowels to retain crockery when heeling.
Refrigerator access: From side and via the worktop.
Storage
- 3 closed cubby-holes
- Under sink with waste bin
- Outboard lower unit with cutlery drawer and sliding vegetable
baskets.
- With 3 sliding Plexiglas bins, with bottle rack under floor.
Waste bin: Sort compartments
Other: Light and ventilation provided by an opening port and ceiling
lights over galley.

Rigging and Sails

Mast: Anodized aluminium with 2 levels of swept spreaders
Rigging: 9/10 fractional
Mast stepping: On keel.
Lights: Anchor and masthead lights.
Topping lift: Boom topping lift cleat.
Boom: Anodized aluminium fitted with 2 quick-reefers.
Standing rigging: Discontinuous in single-strand and Dyform*
stainless cable, chrome-plated bronze rigging screws, comprising:
forestay, backstay, cap shrouds, inter and lower shrouds.
Mast collar: Aluminium, with synthetic gasket and halyard return
pulleys.
Backstay: Backstay adjusted with stay tensioner.
Running rigging: Running rigging in pre-stretched textile
(Dyneema available as option), including: main and genoa halyards,
boom topping lift, main and genoa sheets, mainsheet car and downhaul
adjustments, reef lines and furling line.

Engine Notes

1 x 40hp

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. Hours listed may vary from actual hours due to recent use. Purchaser is encouraged to verify hours prior to purchase. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Location

Estimated Monthly Payment

$0.00*/month

Total Loan Amount:

More Boats from this Dealer

Still have a question?

Get answers, schedule a visit to see the boat, or find a good time for a sea trial.

Take the next step and contact the seller.

Contact seller

Boat Documentation